CONDITIONS條件 | Temperature溫度 | Pressure壓力 |
Operating | 腔內 | 0～150℃ | –0.098MPa |
操作 | 夾套 | 0～160℃ | 0.5MPa |
Design | 腔內 | 160℃ | –0.1MPa |
|
設計 | Jacket 夾套 | 0～170℃ | 0.625MPa |
|
Dry materials 適用物料 | 粉狀濕料 |
Medium for Jacket 夾套加熱介質 | 熱水、水蒸氣 |
MAIN CHARACTERISTICS 主要參數 |
壓力容器類別 | Ⅰ類 |
Virtual volume有效容積 | 3000 | L |
Diathermanous area傳熱面積 | 14 | m2 |
Principal axis Power主軸功率 | 22 | kw |
Total weight主機總重量 | 約7200 | kg |
Total length總長 | 4538 | mm |
Total height 總高 | 3636 | mm |
TotalWidth總寬 | 2150 | mm |
Postweld Heat Treatment for process | (yes or no) | YES |
焊后熱處理 | （是） | |
| MATERIALS材質 |
Metal parts金屬部分 | All parts in contact with the product 物料接觸部分 | 304 | |
parts not in contact with the product 物料不接觸部分 | 支座與夾套Q235 | covered with sus 304 |
| | |
Insulation保溫層 | (yes ) | YES (included in the supply.)The insulation material is silicate mineral wool with 2mm. |
Fire Protection防火 | Personnel Protection |
Type of motor 電機型號 | YB200L2-6-22 | Suitable for Ex-rated area. |
NOZZLES 管口 |
Item | No. | Size | Rat. & Fac. | Service 用途 |
代號 | 數量 | 尺寸mm | |
N1 | 1 | Dn100 | 平面 | Collector outlet撲集器出口 |
N2 | 1 | Dn50 | 平面 | Hot water outlet for shell 腔體熱源出口 |
N3 | 1 | Dn20 | 管螺紋 | Hot water outlet for principal axis主軸熱源出口 |
N4 | 1 | Dn25 | 管螺紋 | Hot water inlet for principal axis主軸熱源進口 |
N5 | 1 | Dn65 | 卡箍 | For vacuum inlet真空吸料口 |
N6 | 1 | Dn250 | 平面 | For vacuum outlet真空出口 |
N7 | 1 | Dn200 | 卡箍 | Feed inlet 投料口 |
N8 | 1 | Dn50 | 平面 | Hot water inlet for shell腔體熱源進口 |
N9 | 1 | Dn25 | 管螺紋 | Hot water outlet for front door前門熱源出口 |
N10 | 2 | Dn100 | 平面 | For sight glass and lamps視鏡與燈鏡 |
N11 | 1 | Dn25 | 管螺紋 | Hot water inlet for front door前門熱源進口 |
N12 | 1 | Dn200 | 平面 | For discharging 出料口 |
N13 | 1 | Dn25 | 管螺紋 | 撲集器熱源出口 |
N14 | | Dn25 | 管螺紋 | 撲集器熱源進口 |
